Perancangan dan Simulasi Mesin Perontok Biji Jagung Kapasitas 400 Kg/Jam

Nabilla Azzah Rosadi; Annisa Ulhafidzah; Yuliarman Yuliarman; Menhendry Menhendry; Yuli Yetri

doi:10.33504/manutech.v15i02.231

Authors

Nabilla Azzah Rosadi
Annisa Ulhafidzah
Yuliarman Yuliarman
Menhendry Menhendry
Yuli Yetri

DOI:

https://doi.org/10.33504/manutech.v15i02.231

Keywords:

shelled corn, sheller cylinder, sheller teeth

Abstract

Corn is one of the main sources of carbohydrates in Indonesia. Corn growth has reached all regions of the archipelago. As a source of carbohydrates other than rice, corn can also be processed into various food industry products such as snacks. In addition, corn can also be used as animal feed so the need for shelled corn is very high in Indonesia. Therefore we need an appropriate technology that functions to facilitate human work to produce shelled corn in a short time and high production yields. So Corn Seed Threshing Machine was designed with a capacity of 400 kg/hour. This machine consists of main components such as a cylinder shell, funnel, guide, and reservoir. This machine uses a 1.5 HP electric motor with a rotation of 1400 rpm and uses a Belt and Puli transmission system. The sheller shaft is added with a spiral-shaped sheller tooth.

Downloads

Download data is not yet available.

References

. Tarigan, Nehemia Ratur, et al. "Perancangan Mesin Penghancur Bonggol Jagung

Untuk Pakan Ternak Sapi Dan Kambing Kapasitas 100 Kg/Jam." Jurnal Rekayasa

Material, Manufaktur dan Energi 2.1 (2019)

. Kanal Pengetahuan dan Informasi Fakultas Teknologi Pertanian Universitas Gadjah Mada, Teknologi Pascapanen Jagung, Available : https://kanalpengetahuan.tp.ugm.ac.id/menara-ilmu/2017/581-teknologi-pascapanen-jagung.html

. Khalid A dan Fitria,” PEMBUATAN MESIN PERONTOK JAGUNG MENGGUNAKAN MOTOR LISTRIK BERBASIS FLOWCHART PROCEDURE”, Jurnal Rotary, Vol. 5 No. 2 (2023) : 87-92.

. Irawan H, Zany H., F., dan Sasongko S. B.,” SIMULASI PEMBEBANAN PADA RANGKA MESIN FUNGSI HYBRID PENGUPAS BIJIH JAGUNG BERBASIS ELEMEN HINGGA”, Jurnal Otopro, Vol 17, No. 2, (2022) : (57-61).

. Purwono A., H, Jamaldi A, Haikal, Margono B, Suryono E, Joharwan J. W, Wiyono A, Isnarno dan Nurhayati D. R.,” Desain dan Analisis Performa Mesin Pemipil Jagung Portabel Berkapasitas Sedang”, Jurnal Penelitian Pertanian Terapan Vol. 23 No. 2 (2023) : 302-310.

. Prayoga M. G. A, Dahlan D, dan Tatak A. R.,” Perancangan Mesin Pembuat Tepung Jagung Kapasitas 5 kg/jam dengan Metode Pahl dan Beitz”, Jurnal Asiimetrik: Jurnal Ilmiah Rekayasa Dan Inovasi, Vol. 5 No. 1 (2020) : 71-82.

. Amrin H, Jamaluddin, dan Lahming,”Rancang Bangun Alat Pemipil Jagung Semi Mekanis”, Jurnal Pendidikan Teknologi Pertanian, Vol 5, No 2, (2020) : 25.

. Wisnu C, Yusman T, Maulana F, dan Raihan, A. A,” Kajian dan Uji Kinerja Rancang Bangun Mesin Perontok Sorgum”, Jurnal Agriekstensia Vol. 20 No. 2 (2021) : 169-182.

. Siregar E. A., Naibaho J. B., Hasballah T, dan Pardede S. P., “RANCANG BANGUN MESIN PEMIPIL JAGUNG DIAGONAL DENGAN MATA PISAU BADSAW KAPASITAS OLAH 80 KG/JAM”, JURNAL TEKNOLOGI MESIN UDA, Vol. 4, No. 1, (2023) : 237 - 247

. Sularso dan Suga. “Dasar Perencanaan dan Pemilihan Elemen Mesin”. Pradnya

Paramita, Jakarta . (2018).