Modifikasi Kapasitas Belt Conveyor dari Kapasitas 400 Ton/Jam Menjadi 600 Ton/jam di Indarung IV PT. Semen Padang

Authors

  • Fanani Prodi Teknik Manufaktur, Jurusan Teknik Mesin, Politeknik Negeri Padang
  • Rahmadhani Prodi Teknik Mesin, Jurusan Teknik Mesin, Politeknik Negeri Padang
  • Mulyadi Prodi Teknik Mesin, Jurusan Teknik Mesin, Politeknik Negeri Padang
  • Aidil Zamri Prodi Teknik Manufaktur, Jurusan Teknik Mesin, Politeknik Negeri Padang
  • Yuli Yetri Prodi Teknik Mesin, Jurusan Teknik Mesin, Politeknik Negeri Padang

DOI:

https://doi.org/10.33504/manutech.v12i2.138

Keywords:

belt conveyor, kapasitas belt conveyor, parameter belt conveyor, drive pulley

Abstract

Belt conveyor is a means of transportation used at Indarung IV PT. Semen Padang. Belt conveyor functions to move material from one place to another both in short distances and long distances with a certain slope. The capacity of limestone conveyor belt owned by Indarung IV is 400 tons/hour. However, this capacity is no longer able to meet the needs of limestone as a raw material for making cement in Indarung IV which currently reaches a capacity of 600 tons/hour. For this reason, an analysis of the 400 ton/hour capacity conveyor belt is still capable of transporting the limestone material with a capacity of 600 tons/hour, using the CEMA (Conveyor Equipment Manufacturer Association) standard. From the calculation results obtained belt conveyor parameters for a capacity of 600 tons/hour such as maximum belt capacity, belt speed, as well as the motor power and gearbox power needed for a capacity of 600 tons/hour. Where, some of these parameters exceed the value of the parameters of the conveyor belt capacity of 400 tons/hour, so the 400 tons/hour conveyor belt is unable to carry a load of 600 tons/hour. Replacement of some components is needed so that a load of 600 tons/hour can be transported.

Downloads

Download data is not yet available.

Author Biography

Aidil Zamri, Prodi Teknik Manufaktur, Jurusan Teknik Mesin, Politeknik Negeri Padang




References

. Rudenko, N., Materials Handling Equipment, Mir Publishers, Moscow, 1986.

. Partanto, P., Pemindahan Tanah Mekanis, Bandung: Teknik Pertambangan Institut Teknologi

Bandung. 1989.

. R. Raharjo, Rancang Bangun Belt Conveyor Trainer Sebagai Alat Batu Pembelajaran, Jurnal Teknik

Mesin. vol. 4, no. 2, 2013.

. Conveyor Equipment Manufacturer Association (CEMA), Belt Conveyor for Bulk Material, USA, 2020.

. Thursby, Harry, Conveyor Belt Technology, Germany: Trans Tech Publications, 1985.

. Sularso, Dasar Perancangan dan Pemilihan Elemen Mesin, PT. Pradnya Paramitha, Jakarta, 1983.

. Raja Hendriko Barus, Analisis Kinerja Belt Conveyor untuk Optimalisasi Pengangkutan Bijih Nikel di

PT. Aneka Tambang Tbk UBPN Pomala, Jurnal JP., Vol. 1, no. 4, 2017.

Downloads

Published

2020-12-07

How to Cite

Fanani, Rahmadhani, Mulyadi, Zamri, A., & Yetri, Y. (2020). Modifikasi Kapasitas Belt Conveyor dari Kapasitas 400 Ton/Jam Menjadi 600 Ton/jam di Indarung IV PT. Semen Padang. Manutech : Jurnal Teknologi Manufaktur, 12(02), 112-120. https://doi.org/10.33504/manutech.v12i2.138