Analisis Troubleshooting pada Engine G3408 Generator Set Caterpillar

Authors

  • Hersalniar Jurusan Teknik Mesin, Politeknik Negeri Padang, Padang
  • Firdaus Jurusan Teknik Mesin, Politeknik Negeri Padang
  • Oong Hanwar Jurusan Teknik Mesin, Politeknik Negeri Padang
  • Hendri Candra Mayana Jurusan Teknik Mesin, Politeknik Negeri Padang
  • Yuli Yetri Jurusan Teknik Mesin, Politeknik Negeri Padang

DOI:

https://doi.org/10.33504/manutech.v12i2.139

Keywords:

Aftercooler, Engine G3408, Hydraulic lock, Troubleshooting

Abstract

A research has been conducted about Troubleshooting that occurs in the Caterpillar Engine G3408 generator Set which aims to analyze the causes of the hydraulic lock and determine how to solve the problems that occur in the Caterpillar G3408 Engine Generator Set. The research method is to perform detection, diagnostic, and repair on the engine by doing a visual check, looking for the root of the problem and doing the test. The results are engine has a hydraulic lock caused by a damaged one of the components of the Air Intake and Exhaust System. The after cooler is also damaged due to its long service life, causing the coolant to enter the combustion chamber. From the overall analysis it is concluded that the cause of engine failure is one of the components is damaged due to a long service life and to overcome this is doing repair and replacement of components on the After cooler with new components and do the periodic maintenance on the Caterpillar G3408 Engine Generator Set.

Downloads

Download data is not yet available.

References

M. Zulhijjah, Apa itu Engine Diesel [Online], Info Teknikku, diakses pada 8 April 2020, Available :

https://muhammadzulhijjahakbar.wordpress.com/2011/06/16/apa-itu-engine-diesel/.

Lintar Hariyandi, Qomariyatus Sholihah, Achmad Kusairi Samlawi, “Analisa Meningkatnya Pemakaian

Oli Pada Engine Excavator 320 D Caterpillar Menggunakan 8 Step Troubleshooting (Studi Kasus PT

Kasongan Bumi Kencana)”, sjme KINEMATIKA, vol. 2, no. 2, pp.67-82, 2017.

Troubleshooting [Online], Wikipedia, diakses pada 8 April 2020, Available :

https://id.m.wikipedia.org/wiki/troubleshooting.

Paulus Tarigan, Elisabeth Ginting, Ikhsan Siregar, “Perawatan Mesin Secara Preventive Maintenane

dengan Modularity Design Pada P. RXZ”, Jurnal Teknik Industri FT USU, vol. 3, no. 3, pp. 35-39, 2013.

Danley Steven, Christopher Egan, Christopher Lyons, Engine Hidrostatic-lock Mitigation : Worcester

Poliytechnic Institute.

Rick Durden, The Pilot’s Lounge #27:Radial Engines and Hydraulic Lock [Online], AVwe, diakses pada

oktober 2020, Available : https://www.avweb.com/features/the-pilots-lounge-27radial-enginesand-hydraulic-lock/.

Engine Hydraulic Locking [Online], Historic Aircraft Assosiation, diakses pada 10 Oktober 2020,

Available : https://haa-uk.aero/document/engine-hydraulic-locking/.

Ben, Reducing Hydraulic Lock [Online], Hydraproducts Blog, diakses pada 10 Oktober 2020, Available

: https://www.hyraproducts.co.uk/Blog/reducing-hydraulic-lock.

Kementriaan Pendidikan Dan Kebudayaan Republic Indonesia, Perawatan Engine dan Unit Alat

Berat, Jakarta: Direktorat Pembinaan SMK, 2013.

G3508 Gas Engine Generator Set, The International System of Units (SI) is used in this publication.

Caterpillar Inc., 1996

Downloads

Published

2020-12-07

How to Cite

Hersalniar, Firdaus, Hanwar, O., Mayana, H. C., & Yetri, Y. (2020). Analisis Troubleshooting pada Engine G3408 Generator Set Caterpillar. Manutech : Jurnal Teknologi Manufaktur, 12(02), 121-127. https://doi.org/10.33504/manutech.v12i2.139

Issue

Vol. 12 No. 02 (2020): Manutech: Jurnal Teknologi Manufaktur

Section

Articles

License

Creative Commons License

This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

https://creativecommons.org/licenses/by-nc/4.0/legalcode

Most read articles by the same author(s)