Analisa Kerusakan Bantalan Bola (Ball Bearing) Berdasarkan Signal Getaran

Authors

  • Muhamad Riva’i
  • Nanda Pranandita

DOI:

https://doi.org/10.33504/manutech.v10i02.69

Keywords:

damage, vibration, deep groove ball bearing

Abstract

Measurement of the damage of elements in bearing can be by measuring the vibration generated in the form of a frequency signal when the pad is rotating. Measurement of vibration on the bearing by using vibration measuring instrument. Damage to the rolling bearing includes damage to the cage, outer ring, inner ring and balls. The rolling bearings used in this study are deep groove ball bearing type 6003 RS with internal diameter (d) = 17 mm, outer diameter (D) = 35 mm, bearing thickness (B) = 10, number of rolling elements (Nb) = 10 pieces, and the diameter of the rolling element (Bd) = 4.75 mm. In the rotation of the bearing (Fr) = 2003 rpm (33.38 Hz) we found the experimental results of bearings that have been damaged in the outer race at 138 Hz frequency, inner race damage at 196 Hz frequency, (ball) at a frequency of 88.8 Hz and cage damage at a frequency of 13.8 Hz

Downloads

References

[1]. B. M. Basaraba and J. A. Archer, Power Transmission System, 11th ed., Canada: IPT Publishing and Training Ltd., 2011.
[2]. B. M. Basaraba and J. A. Archer, Machinery Reability and Condition Monitoring, 4th ed., Canada: IPT Publishing and Training Ltd., 2006.
[3]. T.-J. Lin and et al, "Finite Element Analysis for Dynamic Characteristic of a Deep-Groove Ball Bearing in Motion Process," Journal of Vibration and Shock, vol. 1, no. 1, p. 028, 2009

Downloads

Published

2019-05-20

How to Cite

Riva’i, M., & Pranandita, N. (2019). Analisa Kerusakan Bantalan Bola (Ball Bearing) Berdasarkan Signal Getaran. Manutech : Jurnal Teknologi Manufaktur, 10(02), 41-46. https://doi.org/10.33504/manutech.v10i02.69

Most read articles by the same author(s)