Pembangkit Listrik Tenaga Tekanan Dengan Memanfaatkan Piezoelektrik Pada Lantai

Peprizal Peprizal; Zanu Saputra; Ade Putra Maulana; Bram Tirta; Gerhana Gerhana

doi:10.33504/manutech.v18i01.661

Authors

Peprizal Peprizal Politeknik Manufaktur Negeri Bangka Belitung
Zanu Saputra Politeknik Manufaktur Negeri Bangka Belitung
Ade Putra Maulana Politeknik Manufaktur Negeri Bangka Belitung
Bram Tirta Politeknik Manufaktur Negeri Bangka Belitung
Gerhana Gerhana Politeknik Manufaktur Negeri Bangka Belitung

DOI:

https://doi.org/10.33504/manutech.v18i01.661

Keywords:

power plant, piezoelectrics, energy harvester, renewable energy, pressure

Abstract

The demand for environmentally friendly alternative energy is becoming increasingly urgent due to the global energy crisis and the rise in electricity consumption. One potential solution is the utilization of mechanical energy generated from human pressure or movement using piezoelectric materials, which can convert daily activities into electrical energy. This study aims to design and evaluate a pressure-based electricity generator by applying piezoelectric elements to flooring. The research method employed is Research and Development (R&D), using an experimental approach to assess various piezoelectric circuit configurations: series, parallel, and combined. The experimental results indicate that the parallel configuration provides the best performance, yielding an average voltage of 8.68?V and an average current of 10.65?mA. This configuration delivers a higher current than other arrangements, making it more efficient for energy storage applications. Therefore, the parallel configuration is recommended as the optimal solution to enhance the power output performance of piezoelectric systems in pressure-based electricity generation applications

Downloads

Download data is not yet available.

References

. V. Kulmer and S. Seebauer, “How robust are estimates of the rebound effect of energy efficiency improvements? A sensitivity analysis of consumer heterogeneity and elasticities,” Energy Policy, vol. 132, pp. 1–14, 2019, doi: 10.1016/j.enpol.2019.05.001.

. E. Y. Nababan and A. Novester, “Faktor-faktor yang mempengaruhi permintaan konsumen terhadap listrik pada rumah tangga,” J. Ekonomi Trisakti, vol. 2, no. 2, pp. 407-416, 2022.

. A. E. Setyono and B. F. T. Kiono, “Dari Energi Fosil Menuju Energi Terbarukan: Potret Kondisi Minyak dan Gas Bumi Indonesia Tahun 2020 – 2050,” J. Energi Baru Dan Terbarukan, vol. 2, no. 3, pp. 154–162, 2021, doi: 10.14710/jebt.2021.11157.

. S. A. Arsita, G. E. Saputro, and S. Susanto, “Perkembangan Kebijakan Energi Nasional dan Energi Baru Terbarukan Indonesia,” J. Syntax Transformation, vol. 2, no. 12, pp. 1779–1788, 2021, doi: 10.46799/jst.v2i12.473.

. A. Bramantya, S. Untari, and R. A. Mawarti, “Mewujudkan Net Zero Emission 2060 Melalui Konversi Sampah Menjadi Listrik dalam Perspektif Smart City,” J. Ilmiah Muqoddimah Jurnal Ilmu Sosial Politik Dan Hummaniora, vol. 8, no. 1, p. 190, 2024, doi: 10.31604/jim.v8i1.2024.190-199.

. W. Z. Z. Muna, R. E. Rachmanita, M. Nuruddin, and N. Faizin, “Studi Evaluasi PLTS Off-Grid di Gedung Jurusan Teknik Politeknik Negeri Jember,” Indonesian Journal of Energy and Mineral, vol. 2, no. 2, pp. 1–12, 2022, doi: 10.53026/ijoem/2022/2.2/1017.

. E. Stiawan and A. J. Taufiq, “Rancang bangun alat pemanen energi listrik dari tekanan mekanik berbasis piezoelektrik,” J. Riset Rekayasa Elektro, vol. 2, no. 2, 2020, doi: 10.30595/jrre.v2i2.8280.

. A. M. Elhalwagy, M. Y. M. Ghoneem, and M. Elhadidi, “Feasibility study for using piezoelectric energy harvesting floor in buildings’ interior spaces,” Energy Procedia, vol. 115, pp. 114–126, 2017, doi: 10.1016/j.egypro.2017.05.012.

. H. Liang, G. Hao, and O. Z. Olszewski, “A review on vibration-based piezoelectric energy harvesting from the aspect of compliant mechanisms,” Sensors and Actuators a Physical, vol. 331, p. 112743, 2021, doi: 10.1016/j.sna.2021.112743.

. K. K. Selim, I. H. Smaili, H. M. Yehia, M. M. R. Ahmed, and D. A. Saleeb, “Piezoelectric sensors pressed by human footsteps for energy harvesting,” Energies, vol. 17, no. 10, p. 2297, 2024, doi: 10.3390/en17102297.

. Z. Yang, S. Zhou, J. Zu, and D. Inman, “High-Performance piezoelectric energy harvesters and their applications,” Joule, vol. 2, no. 4, pp. 642–697, 2018, doi: 10.1016/j.joule.2018.03.011.

. D. M. Chavan, S. Chauhan, M. Singh, and A. Tripathi, “Footstep Power Generation using Piezoelectric Sensor and Distribution using RFID,” International Research Journal of Engineering and Technology (IRJET), vol. 7, no. 9 pp. 1416-1420, 2020.

. M. R. Ramadhan, S. Sasmono, and C. Ekaputri, “Perancangan prototipe konversi hybrid energi suara, energi tekanan dan energi angin menjadi energi listrik menggunakan komponen piezoelektrik,” e-Proceeding of Engineering, 2021, vol. 8, no. 5, pp. 4447-4457.

. S. Susilo, E. Listijorini, C. Ahendyarti, I. Febrianto, and A. Adhiwindoro, “Preliminary study-design of a piezoelectric floor energy harvester. TEKNIKA: Jurnal Sains Dan Teknologi, vol. 20, no. 1, pp. 66–72, 2024.

. M. A. Valemtina, E. M. Silalahi, “Perancangan Prototype Pembangkit Piezoelektrik Lantai Untuk Suplai Energi Listrik Lampu Penerangan Pintu Masuk Rumah,” Jurnal Informatika Dan Teknik Elektro Terapan, vol. 13, no. 1, 2025, doi: 10.23960/jitet.v13i1.5983.

. R. J. Ganesh, D. B. Shanmugam, S. Munusamy, and T. Karthikeyan, “Experimental study on footstep power generation system using piezoelectric sensor,” Materials Today Proceedings, vol. 45, pp. 1633-1637, 2020, doi: 10.1016/j.matpr.2020.08.474.

. E. Park, N. Bassiri-Gharb, and I. Stern, “Coupling high resonant frequency piezoelectrics to Human-Scale frequencies for energy harvesting,” Procedia Computer Science, vol. 109, pp. 771– 776, 2017, doi: 10.1016/j.procs.2017.05.318.

. P. Asthana and G. Khanna, “Finite-element modeling of piezoelectric energy harvesters using lead-based and lead-free materials for voltage generation,” Journal of Asian Ceramic Societies, vol. 6, no. 4, pp. 394–400, 2018, doi: 10.1080/21870764.2018.1542968.

. P. Peprizal, and N. Syah, “Pengembangan media pembelajaran berbasis web pada mata pelajaran instalasi penerangan listrik,” Jurnal Imiah Pendidikan dan Pembelajaran, vol. 4, no. 3, pp. 455- 467, 2020.

. M. H Alfatiha, D. B Santoso, and U. Latifa, “Perancangan dan implementasi alat pembangkit listrik hybrid menggunakan tenaga surya dan piezoelectric (P-SUPIR),” Aisyah Journal of Informatics and Electrical Engineering, vol. 6, no. 2, pp. 219-230.

. Z. Wu and Q. Xu, “Design and testing of a new dual-axial underfloor piezoelectric energy harvester,” Sensors and Actuators a Physical, vol. 303, p. 111858, 2020, doi: 10.1016/j.sna.2020.111858.

. A. Kiswantono, “Inovasi Energi Hijau: Piezoelektrik Untuk Mengubah Getaran Kendaraan Menjadi Listrik,” Jurnal Informatika Dan Teknik Elektro Terapan, vol. 12, no. 3, 2024, doi: 10.23960/jitet.v12i3.4452.

. M. Hosseinpour, M. Heydarvand, and M. E. Azizkandi, “A new positive output DC–DC buck-boost converter based on modified boost and ZETA converters,” Scientific Reports, vol. 14, no. 1, 2024, doi: 10.1038/s41598-024-71612-y.