Analisisi Kekakuan Pelat Baja Galvanil Ketebalan 0,6 MM Akibat Pembentukan Dengan Metode Bead Rolled

Febian  M Fadillah; Erwanto Erwanto

doi:10.33504/manutech.v16i02.425

Authors

Febian M Fadillah
Erwanto Erwanto

DOI:

https://doi.org/10.33504/manutech.v16i02.425

Keywords:

Bead Roll, Plate, Galvannealed, Experimental

Abstract

The cold forming process for thin plates is widely used and essential in the manufacturing industry, particularly in the automotive sector. One such cold-forming method is the bead roll process, commonly referred to as "Bead Roll." This process is popular due to its low cost and its ability to improve vibration resistance effectively. The "Bead Roller" machine is used to create grooves or profiles on sheet metal plates. Based on experimental analysis of the collected data, the plate with the best damping capability was found to be the one processed using a roll width of 10 mm and a rolling depth of 3 mm. This research is expected to expand knowledge about plates as an innovative new form and serve as a reference for future research and development

Downloads

Download data is not yet available.

References

Suarsana, “Ilmu Material Teknik,” Univ. Udayana, pp. 47–56, 2017.

Y. Gunawan, N. Endriatno, and B. H. Anggara, “Analisa Pengaruh Pengelasan Listrik Terhadap Sifat Mekanik Baja Karbon Rendah Dan Baja Karbon Tinggi,” Enthalpy-Jurnal Ilm. Mhs. Tek. Mesin, vol. 2, no. 1, pp. 1–12, 2017.

W. Naibaho, S. Siahaan, and R. Naibaho, “Analisa Perbandingan Putaran Mesin Untuk Kompresor Air Condition Pada Mobil Daihatsu Taruna Terhadap Karakteristik Getaran Berdasarkan Time Domain,” J. MESIL (Mesin Elektro Sipil), vol. 2, no. 1, pp. 25–35, 2021, doi: 10.53695/jm.v2i1.229.

S. Yulianto and I. Aryawidura, “Pengaruh Waktu Tahan Hot Dip Galvanized Terhadap SIFAT MEKANIK, TEBAL LAPISAN, DAN STRUKTUR MIKRO BAJA KARBON RENDAH,” Sintek, vol. 6, no. 2, pp. 33–44, 2016, [Online]. Available: https://jurnal.umj.ac.id/index.php/sintek/article/view/134%0Ahttps://jurnal.umj.ac.id/index.php/sintek/article/viewFile/134/116

S. Produk, “Lokfom galvanil,” Dok. Tips, pp. 3–5, 2023, [Online]. Available: https://dokumen.tips/documents/galva nil.html

Sukanto and Erwanto, “Pengaruh Perlakuan Panas Pada Pembentukan Pelat Beralur Panel Kendaraan Terhadap Peningkatan Frekuensi Alamiah Diukur Pada Kondisi Batas Jepit-Jepit,” J. Rotor, no. 2, pp. 1–6, 2016.

M. Darensyah, P. Manufaktur, and N. Bangka, “Pengaruh Pengerolan Pelat Kondisi Dingin Terhadap Kekakuan Pelat Pada Bak Mobil Pick Up,” vol. 01, no. 1, pp. 1–7, 2023.

Jaelani, Otong, and Heri Suripto. "Analisis Performa dan Nilai Ekonomi Sistem Solar Cell Untuk Pengoperasian Pompa Air dengan Metode Eksperimental." Jurnal Rekayasa Mesin 15.1 (2020): 42-50.

M. I. Nur Kholis, E. Erwanto, and F. Aswin, “Analisa Kekakuan Pelat terhadap Pembentukan Dimple Dies dengan Variasi Diameter Lubang dan Jumlah Lubang Dimple,” J. Inov. Teknol. Terap., vol. 2, no. 1, pp. 194–200, 2024, doi: 10.33504/jitt.v2i1.168.