Desain Kendaraan Disabilitas Pengguna Kursi Roda

Authors

  • Yudi Oktriadi politeknik manufaktur negeri bangka belitung
  • Rodika Rodika
  • Subkhan Subkhan
  • Anita Fricilya
  • Gian Pratama Putra
  • Harianto Harianto

DOI:

https://doi.org/10.33504/manutech.v16i01.293

Keywords:

Design, Production, Construction, Vehicle, disabled

Abstract

The rate of transportation development in Indonesia faces a significant increase. However, the increase in transportation rates is not in line with the increase in residents, especially for people with disabilities. One form of discrimination against people with disabilities is the lack of accessible transportation equipment for wheelchair users. The lack of service facilities makes people with disabilities feel insecure. The lack of facilities provided makes people with disabilities choose to use individual vehicles to continue activities like normal people. The purpose of the research on providing transportation facilities for people with leg disabilities is very much needed in carrying out daily activities easily and without obstacles. The design of a wheelchair user disability vehicle uses the VDI 2222 design method with 4 stages, namely planning, conceptualizing, designing, and completing. From the conceptualization session, 3 design concept variations were generated which were then assessed based on technical and economical aspects. From the test results that were tested, the average speed that can be reached by this wheelchair user disability vehicle is 30 kilometers / hour.

Downloads

Download data is not yet available.

References

. Fahrurrozi. (2014). Rancang bangun roda belakang dengan sistem suspensi independen.

. MeydiMuhammad, erwiansya. (2014). Retrieved from rancang bangun sepeda lipat elektrik

. Restyanto. (2016). Perancangan roda tiga kaum difabel. From universitas atma jaya yogyakarta

. Moch. Rizal Rynaldy, H. P. (2016). perusahaan distribusi motor roda 3, Tulung agung. <http://motor3roda.com>

. M Andi Firmansyah, Ali Imron, Fipka Bisono. (2018). Analisa proses perakitan dan pembuatan kendaraan bermotor roda tiga. Program Studi Teknik Desain dan Manufaktur, Jurusan Teknik Permesinan Kapal, Politeknik Perkapalan Negeri Surabaya, Surabaya. http://www.Analisa Proses Perakitan dan Pembuatan Kendaraan Bermotor.com.

. Forber-Pratt, A. J. (2015). Paralympic Sport as a Vehicle for Social Change in Bermuda and Ghana. Journal of Sport for Development.

. Choroma?ski, W., & Grabarek, I. (2015). Driver with Varied Disability Level – Vehicle System: New Design Concept, Construction and Standardization of Interfaces. Procedia Manufacturing. https://doi.org/10.1016/j.promfg.2015.07.854

. Kassim, A. M., Jamri, M. S., Aras, M. S. M., & Rashid, M. Z. A. (2012). Design and development of vibration method for Vehicle Reverse System (VRS). Procedia Engineering. https://doi.org/10.1016/j.proeng.2012.07.290

. Kundu, A. S., Mazumder, O., Lenka, P. K., & Bhaumik, S. (2017). Omnidirectional Assistive Wheelchair: Design and Control with Isometric Myoelectric Based Intention Classification. Procedia Computer Science. https://doi.org/10.1016/j.procs.2017.01.200

. Van Der Woude, L. H. V., Dallmeijer, A. J., Janssen, T. W. J., & Veeger, D. (2001). Alternative modes of manual wheelchair ambulation: An overview. In American Journal of Physical Medicine and Rehabilitation. https://doi.org/10.1097/00002060-200110000-00012

. Wassermann, D., Asch, A., Blustein, J., & Putnam, D. (2011). Disability: Definitions, Models, Experience. In Stanford Encyclopedia of Philosophy.

. Turk, D. C. (2002). A diathesis-stress model of chronic pain and disability following traumatic injury. In Pain Research and Management. https://doi.org/10.1155/2002/252904

Downloads

Published

2024-08-01

How to Cite

Oktriadi, Y., Rodika, R., Subkhan, S., Fricilya, A. ., Putra, G. P., & Harianto, H. (2024). Desain Kendaraan Disabilitas Pengguna Kursi Roda. Manutech : Jurnal Teknologi Manufaktur, 16(01), 47 - 52. https://doi.org/10.33504/manutech.v16i01.293

Most read articles by the same author(s)

1 2 > >>