Pengaruh Sudut Part Build Orientation Z-Direction Terhadap Kuat Tarik Spesimen Uji Standar Astm D638 Type IV Menggunakan Filamen Pla+

Pristiansyah Pristiansyah; Yuliyanto Yuliyanto; Masdani Masdani; Zaldy Sirwansyah Suzen; Zaldy Kurniawan; Sugianto Sugianto; Hasdiansah Hasdiansah; Indra Feriadi; Yogi Pranata; Robert Napitupulu; Harwadi Harwadi

doi:10.33504/manutech.v15i02.279

Authors

Pristiansyah Pristiansyah Politeknik Manufaktur Negeri Bangka Belitung
Yuliyanto Yuliyanto
Masdani Masdani
Zaldy Sirwansyah Suzen
Zaldy Kurniawan
Sugianto Sugianto
Hasdiansah Hasdiansah
Indra Feriadi
Yogi Pranata
Robert Napitupulu
Harwadi Harwadi

DOI:

https://doi.org/10.33504/manutech.v15i02.279

Keywords:

3D Printing, ASTM D638 TYPE IV, Filament PLA , Part build Z-Direction, Tensile Strength

Abstract

This study will try to investigate variations in the angle of the Z-direction build part by using a 3D Printer with Fused Deposition Modeling (FDM) technology made from PLA + Sugoi. This study uses a 0.4mm nozzle with a Bowden type extruder. This study uses a PLA+ filament from the Sugoi brand with a nozzle of 0.4 mm, diameter filament 1,75 mm, 3D Printer with Fused Deposition Modeling (FDM) technology used is Creality Ender 3 V2 with process parameter settings in slicing software using a layer thickness of 0.30 mm, Top solid Layer 5, Bottom Solid Layer 5, Fill density 100%, cooling speed 100%, and flowrate 100%, nozzle temperature 205°C, and bed temperature 60°C. Variation in angle Part build Z-direction is proven to have a significant difference in Tensile strength with a difference of 10° resulting in a difference in Tensile strength of 15 MPa, where the highest tensile strength is 67.50 MPa with part build Z-direction at an angle of 80°, and the lowest tensile strength of 52.50 MPa with a Z-direction part build angle at an angle of 70°.

Downloads

Download data is not yet available.

References

. Hasdiansah H, Pristiansyah P, Suzen ZS. Pengaruh Orientasi Posisi Printing Z Axis Mesin 3D Printing Terhadap Kuat Tarik Menggunakan Filamen Super Tough PLA. Manutech [Internet]. 2022Jun.9 [cited 2022Aug.30];14(01):23 - 1. Available from: https://ejournal.polman-babel.ac.id/index.php/manutech/article/view/197

. S. Suzen Z, Dirga Trisaplin R, Hasdiansah H. Analisis Pengaruh Parameter Infill Pattern dan Nozzle Temperature Terhadap Tensile Strength Filamen PLA PRO. Manutech [Internet]. 2022Jun.9 [cited 2022Aug.31];14(01):39 - 46. Available from: https://www.ejournal.polman-babel.ac.id/index.php/manutech/article/view/208

. Pristiansyah P, Hasdiansah H, Ferdiansyah A. Pengaruh Parameter Proses Pada 3D Printing FDM Terhadap Kekuatan Tarik Filament ABS CCTREE. Manutech [Internet]. 2022Jun.9 [cited 2022Aug.31];14(01):15 - 22. Available from: https://ejournal.polman-babel.ac.id/index.php/manutech/article/view/210

. Hasdiansah H. Optimization of Process Variables in 3D Printing on Dimensional Accuracy Using Nylon Filaments. IJNMT (International Journal of New Media Technology) [Internet]. 5Jul.2022 [cited 31Aug.2022];9(1):1-. Available from: https://ejournals.umn.ac.id/index.php/IJNMT/article/view/2398

Intani Adinata BA, Hasdiansah H, Sirwansyah Suzen Z. PENGARUH PARAMETER PROSES 3D PRINTING MENGGUNAKAN FILAMEN ESUN PLA +, MENGGUNAKAN METODE TAGUCHI. SNITT [Internet]. 2021 Aug. 2 [cited 2022 Aug. 31];1(01):323-9. Available from: https://snitt.polman-babel.ac.id/index.php/snitt/article/view/65

. M.Yusuf YS, Hasdiansah H. PENGARUH PARAMETER PROSES TERHADAP KEKUATAN TARIK FILAMEN ST-PLA MENGGUNAKAN METODE TAGUCHI. SNITT [Internet]. 2021 Aug. 2 [cited 2022 Aug. 31];1(01):74-9. Available from: https://snitt.polman-babel.ac.id/index.php/snitt/article/view/105

. Putra RDP, Zaldy Sirwansyah Suzen, Hasdiansah. OPTIMASI PARAMETER PROSES 3D PRINTING TERHADAP KEKUATAN TARIK FILAMENT ABS MENGGUNAKAN METODE TAGUCHI. SNITT [Internet]. 2022 Feb. 22 [cited 2022 Aug. 31];2(01):478-84. Available from: https://snitt.polman-babel.ac.id/index.php/snitt/article/view/226

. Subakti Y, Hasdiansah H, Kurniawan Z. Pengaruh Media, Temperatur Dan Waktu Perlakuan Annealing Pada Spesimen Standar ASTM D638 Type IV Menggunakan Filamen ST PLA. SPROCKET JOURNAL OF MECHANICAL ENGINEERING [Internet]. 22Aug.2021 [cited 31Aug.2022];3(1):7-4. Available from: https://jurnal.uhn.ac.id/index.php/mechanical/article/view/569

. Pratama W, Hasdiansah H, Husman H. Optimasi Parameter Proses 3D Printing Terhadap Kuat Tarik Material Filamen PLA + Menggunakan Metode Taguchi. SPROCKET JOURNAL OF MECHANICAL ENGINEERING [Internet]. 22Aug.2021 [cited 31Aug.2022];3(1):39-5. Available from: https://jurnal.uhn.ac.id/index.php/mechanical/article/view/568

. Pranata Y, Hasdiansah H, Fitri Arriyani Y. PENGUJIAN KUAT TARIK PRODUK CETAK 3D PRINTING MATERIAL ABS . SNITT [Internet]. 2022 Feb. 22 [cited 2022 Aug. 31];2(01):85-91. Available from: https://snitt.polman-babel.ac.id/index.php/snitt/article/view/158

. Siregar Y, Suantara D, Prameswari N, Setiawan N. APLIKASI PENCETAKAN 3D DARI MOTIF KAIN CUAL TAMPOK MANGGIS DALAM PRODUK FESYEN OUTER WANITA. senada [Internet]. 1Apr.2021 [cited 31Aug.2022];4:366-73. Available from: https://eprosiding.idbbali.ac.id/index.php/senada/article/view/598

. Dwi Agustini I, Hasdiansah H, Anggry A. OPTIMASI AKURASI DIMENSI HASIL CETAKAN PROSES 3D PRINTING YANG TERBUAT DARI FILAMEN NYLON MENGGUNAKAN METODE TAGUCHI. SNITT [Internet]. 2022 Feb. 22 [cited 2022 Aug. 31];2(01):58-64. Available from: https://snitt.polman-babel.ac.id/index.php/snitt/article/view/201

. Prabowo I, Chalid M. OPTIMALISASI SIFAT MEKANIK BIOKOMPOSIT PLA DENGAN SERAT ARENGA PINNATA. Journal of Science, Technology, and Visual Culture, [S.l.], v. 1, n. 2, p. 65-68, oct. 2021. ISSN 2798-8767. Available at: <https://journal.itera.ac.id/index.php/jstvc/article/view/595>. Date accessed: 31 aug. 2022.

. Corapi D, Morettini G, Pascoletti G, Zitelli C. Characterization of a Polylactic acid (PLA) produced by Fused Deposition Modeling (FDM) technology. Procedia Struct Integr. 2019;24:289–95.

. Zisopol DG, Nae I, Portoaca AI, Ramadan I. A Theoretical and Experimental Research on the Influence of FDM Parameters on Tensile Strength and Hardness of Parts Made of Polylactic Acid. Eng. Technol. Appl. Sci. Res. [Internet]. 2021 Aug. 21 [cited 2022 Aug. 5];11(4):7458-63. Available from: https://www.etasr.com/index.php/ETASR/article/view/4311