Desain dan Implementasi Modul Kit Laboratorium Mikrokontroler AT89S52 dengan Single PCB, Portable dan Prospektif

Milda Yuliza; Fatum Rahmana Putra; Yultrisna Yultrisna; Era Madona; Adi Chandranata

doi:10.33504/manutech.v15i01.256

Authors

Milda Yuliza
Fatum Rahmana Putra
Yultrisna Yultrisna
Era Madona
Adi Chandranata

DOI:

https://doi.org/10.33504/manutech.v15i01.256

Keywords:

microcontroler, trainer, laboratory kit module

Abstract

This study aims to design and implement a new design of a single PCB, portable and prospective laboratory kit module. The laboratory kits made are easy to assemble, with relatively small dimensions. and suitable for use in laboratories with limited experimental space and funds. The objectives of this research are (a) creating a microcontroller trainer by creating a series of minimum systems, inputs, outputs, Analog Digital Converter (ADC), (b) system programming using the Keil C51 IDE, (c) measuring and testing trainer performance. The research method starts from making a physical trainer, programming the microcontroller and measuring circuit performance. Pulse width modulation (PWM) of DC motors and the direction of rotation of the motor can be controlled using a potentiometer. The wave that is obtained when the motor is at full speed is in the form of a straight line with a voltage of 9.12 V, while when the motor is at half-full speed, a PWM pulse wave is obtained with a voltage of 4.35 V. The test is carried out based on student practicum work on each input circuit, and the output results are all applications tested successfully as expected.

Downloads

Download data is not yet available.

References

M. Yuliza, J. T. Elektro, and P. N. Padang, “Manutech?: Jurnal Teknologi Manufaktur Rancang Bangun Timbangan Buah Digital Berbasis Mikrokontroler Dengan Koneksi Printer Thermal,” vol. 13, no. 02, 2021.

S. K. Ibrahim, H. M. Hathal, and R. A. Abdulhussein, “Baud rate variations effect on virtual channel based on PIC microcontroller,” Telkomnika (Telecommunication Comput. Electron. Control., vol. 17, no. 6, pp. 2755–2763, 2019, doi: 10.12928/TELKOMNIKA.v17i6.12828.

P. Elangovan and N. K. Mohanty, “FPGA based V/f control of three phase induction motor drives integrating Super-lift Luo consverter,” Int. J. Power Electron. Drive Syst., vol. 5, no. 3, pp. 393–403, 2015, doi: 10.11591/ijpeds.v5.i3.pp393-403.

Budi Rahman and Imelda, “Prototipe Sistem Kontrol Smart Home Berbasis IoT Dengan Metode MQTT Menggunakan Google Asisstant,” Jurnal RESTI Vol. 4 No. 3 (2020) 303 – 310, doi: https://doi.org/10.29207/resti.v4i2.1721

C. R. Algarín, J. Pinto, and E. Giraldo, “Tire Pressure Monitoring System Using an Android Application,” Int. J. Adv. Sci. Eng. Inf. Technol., vol. 10, no. 5, pp. 1867–1873, 2020, doi: 10.18517/ijaseit.10.5.6359.

V. R. Mutha, N. Kumar, and P. Pareek, “Real time standalone data acquisition system for environmental data,” 1st IEEE Int. Conf. Power Electron. Intell. Control Energy Syst. ICPEICES 2016, pp. 1–4, 2017, doi: 10.1109/ICPEICES.2016.7853337.

G. E. Real, M. Florencia Jaure, and A. O. Vitali, “Data acquisition and industrial control system based on Arduino Due using open-source hardware and software,” Proc. 2018 Technol. Appl. to Electron. Teaching, TAEE 2018, 2018, doi: 10.1109/TAEE.2018.8476072.

Indrianto, M. N. I. Susanti, R. Arianto, and R. R. A. Siregar, “Embedded system practicum module for increase student comprehension of microcontroller,” Telkomnika (Telecommunication Comput. Electron. Control., vol. 16, no. 1, pp. 53–60, 2018, doi: 10.12928/TELKOMNIKA.v16i1.4194.

P Koopman, et al. Undergraduate Embedded System Education at Carnegie Mellon. ACM Trans. Embed. Comput. Syst. 2005; 4(3): 500-528.

A. Aswardi, R. Mukhaiyar, E. Elfizon, and N. Nellitawati, “Pengembangan Trainer Programable Logic Gontroller Sebagai Media Pembelajaran Di Smk Negeri Kota Payakumbuh,” JTEV (Jurnal Tek. Elektro dan Vokasional), vol. 5, no. 1.1, p. 51, 2019, doi: 10.24036/jtev.v5i1.104846.

P. C. Doanwilmon and A. Aswardi, “Pengembangan Media Pembelajaran Mikrokontroler Berbasis Trainer Pada Jurusan Teknik Elektro Fakultas Teknik Universitas Negeri Padang,” JTEV (Jurnal Tek. Elektro dan Vokasional), vol. 6, no. 1, p. 271, 2020, doi: 10.24036/jtev.v6i1.107972.

I. G. P. A. Buditjahjanto, C. A. Rizqi, and B. Suprianto, “Developing robot transporter learning media to learn microcontroller,” J. Pendidik. Vokasi, vol. 10, no. 3, pp. 270–281, 2020, doi: 10.21831/jpv.v10i3.34140.

Y. S.Kom and U. Rahmalisa, “Design of Microcontroller Programming Learning KIT Using Scratch for Arduino,” J. Teknol. Dan Open Source, vol. 4, no. 2, pp. 254–259, 2021, doi: 10.36378/jtos.v4i2.1793.

S. Sukir, S. Soenarto, and S. Soeharto, “Developing conveyor trainer kit for programmable logic controllers in practical learning,” J. Pendidik. Vokasi, vol. 7, no. 3, p. 329, 2018, doi: 10.21831/jpv.v7i3.15352.

E. Madona, Y. Yulastri, A. Nasution, and M. Irmansyah, “Design and Implementation of Portable and Prospective Embedded System and IoT Laboratory Kit Modules,” Indones. J. Electron. Electromed. Eng. Med. Informatics, vol. 4, no. 1, pp. 28–35, 2022, doi: 10.35882/ijeeemi.v4i1.5.

Rachmad Setiawan, Mikrokontroler MCS-51: Graha Ilmu, 2006.