Desain dan Pengembangan Transfer Case untuk Kendaraan Multi Guna Kapasitas Angkut 750 Kilogram


  • Asep Indra Komara Teknik Perancangan Manufaktur, Politeknik Manufaktur Bandung
  • Panji Mufti Ali Teknik Perancangan Manufaktur, Politeknik Manufaktur Bandung
  • Antonius Adi Soetopo Teknik Manufaktur, Politeknik Manufaktur Bandung



transmission system, transfer case, utility vehicle


The Automotive Power Train Development Center (P3TO) POLMAN Bandung aims to develop utility vehicles for agricultural and plantation areas with a loading capacity of 750 kg. One of the studies focuses on the design and development of the transfer case transmission system, an additional unit in the transmission system for distributing power from the engine to the wheels and production machines through Power Take-Off (PTO). The purpose of this research is to produce a transfer case design that provides large power output, reliable, safe, and cheap. The engineering process is preceded by studying on existing construction then modifying and designing it to meet demands by applying the Pahl & Beitz methodology consisting of planning and clarifying tasks, making a list of demands, making basic concepts, designing transfer cases, and validating designs. The main evaluation criteria such as vehicle operations in all-terain, engine, gearbox, and vehicle speed were observed. The results were also validated using three methods, namely theoretical, KISSsoft software, and finite element simulation in solids work. This research produced a transfer case design of 1.8 rations with a size of 461 mm x 433 mm x 223 mm and a weight of 25 kg. All gear and shaft components are able to withstand the load that occurs in the transfer case due to operational, engine, and production machine tools.


Download data is not yet available.

Author Biographies

Asep Indra Komara, Teknik Perancangan Manufaktur, Politeknik Manufaktur Bandung

Antonius Adi Soetopo, Teknik Manufaktur, Politeknik Manufaktur Bandung


. H. Naunheimer, B. Bertsche, J. Ryborz and W. Novak, Automotive Transmissions: Fundamentals,

Selection, Design and Application, Berlin Heidelberg: Springer-Verlag, 2011.

. A. Patankar, R. Kulkarni, S. Kothawade and S. Ingale, "DESIGN AND DEVELOPMENT OF A


Engineering and Technology (IJMET), vol. 7, no. 3, pp. 351-359, 2016.

. L. Karikalan, K. Mathan, D. Devanand and S. Vijay, "Design and Analysis of Two Stage Reduction

Gearbox for All Terrain Vehicles," International Journal of Advance Engineering and Research

Development, vol. 5, no. 03, pp. 357-361, 2018.

. M. S. W. Sunggono and U. Wasiwitono, "Perancangan dan Analisa Karakteristik Traksi Sistem

Powertrain Mobil Produksi Pedesaan," JURNAL TEKNIK ITS, vol. 6, no. 1, pp. F170-F173, 2017.

. M. Rifai and I. N. Sutantra, "Perancangan Sistem Transmisi 2WD dan 4WD serta Analisis Karakterisitik

Traksi pada Mobil," JURNAL TEKNIK ITS, vol. 7, no. 2, pp. E175-E179, 2018.

. G. Pahl and W. Beitz, Engineering Design: A Systematic Approach 2nd Ed., Darmstadt, Germany:

Springer-Verlag London, 1996.

. A. I. Komara, B. P. Adikara, R. A. Respati and A. A. Soetopo, "DESIGN AND DEVELOPMENT OF A


NASIONAL TEKNOLOGI TERAPAN 2017, Yogyakarta, 11 November 2017.

. A. Maciejczyk and Z. Zdziennicki, Design Basic of Industrial Gear Boxes: Calculation and Design Case

Example, Technical University of Lodz.

. H. Wittel, D. Muhs, D. Jannasch and J. Voßiek, Roloff /Matek Maschinenelemente, 21.Auflage,

Deutschland: Springer Vieweg, 2013.

.R. N. Jazar, Vehicle Dynamics: Theory and Application, New York: Springer Science, 2008.

.J. Zhang, Q. Zhang and R. Shi, "Finite Element Analysis and Optimization of Helical Gear-pairs with

Web based on SolidWorks," in IOP Conf. Series: Materials Science and Engineering, 382, 042023,




How to Cite

Komara, A. I., Ali, P. M., & Soetopo, A. A. (2020). Desain dan Pengembangan Transfer Case untuk Kendaraan Multi Guna Kapasitas Angkut 750 Kilogram. Manutech : Jurnal Teknologi Manufaktur, 12(02), 81-91.