PROGRAM KEMITRAAN MASYARAKAT (PkM) KELOMPOK USAHA MASYARAKAT PENGOLAH SABUT KELAPA UNTUK COCOPEAT DAN POT TANAMAN

Yuliyanto Yuliyanto; Sugiyarto Sugiyarto; Sukanto Sukanto

doi:10.33504/dulang.v2i02.244

Authors

Yuliyanto Yuliyanto Politeknik Manufaktur Negeri Bangka Belitung
Sugiyarto Sugiyarto
Sukanto Sukanto

DOI:

https://doi.org/10.33504/dulang.v2i02.244

Keywords:

Decomposer machine, coco coir, cocopeat, production machine

Abstract

This PKM activity aims to increase the income of the community, especially housewives in Sungailiat District, Bangka Regency. The program carried out is processing coconut coir into pots and cocopeat. Sungailiat District has a lot of coconut tree plants belonging to the surrounding community, especially in the coastal area. One of the partners for PKM activities is Mr. Karyadi, whose address is in Rebo Village, Sungailiat District, Bangka Regency. Problems that arise in the production process include the length of time required for the process of taking coconut coir and cocopeat powder, which is ± 10 days. Because the process of taking it must be soaked and beaten. The implementation of this activity is carried out by field observation, machine design, machine manufacturing, operation and maintenance training and monitoring and evaluation. The results of this PkM show that the manufacture and procurement of coco decomposing machines for partners has been well realized. There is still a process left because there is an outer part of the coconut husk that is still attached to the machine. This is due to the distance between the wall and the crushing blade having a distance of approximately 15 mm.

Downloads

Download data is not yet available.

References

Abdul Gofur dan Andrian Muklis. (2022) Rancang Bangun Mesin Pengurai Sabut Kelapa Menjadi Cocopeat dan Cocofiber. Jurnal Dinamika Vokasional Teknik Mesin Vol. 7, No. 1, pp.55-61

Arif Irawan dan Yeremias Kafiar (2015). Pemanfaatan cocopeat dan arang sekam padi sebagai media tanam bibit cempaka wasian (Elmerrilia ovalis), Seminar Nasional Masyarakat Biodiv Indonesia Vol. 1, No. 4.

Handoko Priono, Muhaammad Yusri Ilyas, Aditya Riska Nugroho, Dimas Setyawan, Laili Maulidiyah dan Rinasa Agistya Anugrah. (2019). Desain Pencacah Serabut Kelapa Dengan Penggerak Motor Listrik. JURNAL ENGINE Vol. 3, No.1

Kurnia. L, Supraptiningsih, Shofia Hattarina. (2018). PKM Kelompok Industri Pengolahan Limbah Sabut Kelapa (Cocopeat) Di Kabupaten Dan Kota Probolinggo Provinsi Jawa Timur. Jurnal Ilmiahetal, Vol.2, No.2, pp22-38.

Lesmono, I. (2017). Pengertian Solidworks. Diambil kembali dari Docplayer: https://docplayer.info/37416685-Bab-ii-dasar-teori-2-1-pengertian-umum-mesin-perontok-padi-2-2-rangka.html

Soetan Risky, (2011) Konsep Dasar Rekayasa Perangkat Lunak. Prestasi pustaka. Jakarta

Sularso, d. K. (2004). Dasar Perencanaan Dan Pemilihan Elemen Mesin. Dalam Dasar Perencanaan Dan Pemilihan Elemen Mesin. Jakarta: PT Pradnya Paramita.

Syahputra, M. (2020). Pembuatan Mesin Pengurai Sabut Kelapa. Tugas Akhir. Universitas Muhammadiyah Sumatera Utara

Wildan, A. (2010). Studi Proses Pemutihan Serat Kelapa Sebagai Reinforced Fiber. Tesis Program Pascasarjana Universitas Diponegoro Semarang

Y. Bastian, S. Rohman.(2017) Pemanfaatan Sabut Kelapa Sebagai Bahan Baku Industri (Otomotif, Rumah Tangga, Pertanian) Yang Bernilai Ekonomis Guna Meningkatkan Perekonomian Masyarakat Desa DiKecamatan Glagah Kabupaten Banyuwangi. .Jurnal Alakaba. Vol.1, No.2. pp. 28-38