Analisis Kemampuan Bata Ringan sebagai Material Peredam Panas dalam Konstruksi Dinding

Authors

  • Herlina Silalahi Politeknik Manufaktur Negeri Bangka Belitung
  • Ilham Ary Wahyudie Politeknik Manufaktur Negeri Bangka Belitung
  • Yuli Dharta Politeknik Manufaktur Negeri Bangka Belitung

DOI:

https://doi.org/10.33504/manutech.v18i01.796

Keywords:

lightweight brick, heat, soundproofing, room, sound

Abstract

 Lightweight bricks are materials used in the construction of building walls, produced through a mixture of cement, water, and sand. In several cases that occur in buildings, especially regarding indoor heat, the spaces become less comfortable to occupy. This study aims to determine the effect of curing duration on heat insulation. A full factorial method was applied in the experimental design, with curing durations of 19, 25, 26, 32, and 39 days for heat insulation testing, and 19 and 27 days for sound insulation testing. The GSP Temperature and Humidity Data Logger GSP6 was used for data collection. The results of this study showed that the best specimen for heat insulation was at a curing duration of 32 days, with an average test result of 29.35 °C, while the lowest performance was found in specimens with a curing duration of 26 days, with a value of 31.4 °C. These results indicate that lightweight bricks cured for 32 days provide the most effective thermal insulation for rooms and buildings

Downloads

Download data is not yet available.

References

[1]. Zansent Liondy Frias Herosonna, “Perancangan Panel Dinding Ringan Berbahan Botol Plastik Metode Komposit Sandwich”, Laporan Tugas Akhir, Yogyakarta : Universitas Islam Indonesia, 2017.

[2]. Afriansyah, Nurmaidah, & Amsuardiman, “Analisa Kenaikan Volume dan Kuat Tekan pada Campuran Beton Non Pasir dengan Penambahan Baking Powder”. Journal Of Civil Engineering Building And Transportation, vol. 1, no.1, pp.1-10, 2017.

[3]. Maria Regina Beribi Kedang , Abdul Halim, Aji Suraji, “Kajian Perbandingan Daya Redam Suara Dan Panas Pada Material Dinding Batako, Batu Bata Dan Bata Ringan”. BOUWPLANK Jurnal Ilmiah Teknik Sipil dan Lingkungan, vol.2, no.2, pp. 1-10, 2022.

[4]. Parmin Lumbantoruan, Heru Prasetio, Rahmawati,“Kemampuan Variasi Campuran Sekam Padi Pada Batako Terhadap Peredaman Suhu”, Jurnal Deformasi Universitas PGRI Palembang, vol. 7, no. 2, pp. 175-183, 2022.

[5]. Ilham Ary Wahyudie, Sulistiana Rachmadini, Muhammad Riva’i, Zaldy Kurniawan, “The Effect of Palm Frond Powder on the Heat Reducing Ability of Cement Bricks”, Kexue Tongbao/Buletin Sains Tiongkok, vol. 69, no. 7, pp. 2429-2440, 2024.

[6]. Ilham Ary Wahyudie, Sulistiana Rachmadini, Muhammad Riva’i, “Analisis Pengaruh Penambahan Serbuk Pelepah Kelapa Sawit Pada Komposit Berbasis Semen Untuk Peredam Panas”, Jurnal Infotekmesin, vol. 15, no.2, pp. 362-369, 2024.

[7]. Robert Napitupulu, & Andreas Chardova, Zaldy Kurniawan, “Pemanfaatan Fly Ash Sebagai Bahan Alternatif Pada Bata Beton Untuk meningkatkan Peredaman Panas” JTT (Jurnal Teknologi Terpadu), vol. 12, no. 2, pp. 176-181, 2024.

[8]. Sangkot Nasution, “Variabel Penelitian”, Jurnal Raudhah, vol. 5, no. 2, pp. 1-9, 2017

[9]. Douglas C. Montgomery, Design and analysis of experiments , Arizona State University, 2022, Available:https://www.researchgate.net/publication/361342853_Design_and_Analysis_of_Experiments

[10]. Panenungi T. & Nurlita Pertiwi, Ilmu Bahan Bagunan, Makassar: Badan Penerbit Universitas Negeri Makassar, 2018)

Downloads

Published

2026-06-30

How to Cite

Silalahi, H., Wahyudie, I. A., & Dharta, Y. (2026). Analisis Kemampuan Bata Ringan sebagai Material Peredam Panas dalam Konstruksi Dinding. Manutech : Jurnal Teknologi Manufaktur, 18(01), 85–91. https://doi.org/10.33504/manutech.v18i01.796

Most read articles by the same author(s)