PELATIHAN 3D PRINTING UNTUK JURUSAN KENDARAAN RINGAN SMK DHUAFA PADANG
DOI:
https://doi.org/10.33504/dulang.v5i02.412Keywords:
3D printing, technical training, student competence, additive manufacturing, automotive, vocational schoolsAbstract
3D Printing training has been implemented as part of efforts to develop technical competence in vocational education, especially for students of the Light Vehicle Department at SMK Dhuafa Padang. This study aims to assess the effectiveness of 3D Printing training in improving students' skills in the application of additive manufacturing technology in the automotive sector. The training methods applied include the delivery of theoretical materials, technical demonstrations, and exercises. Evaluation of the effectiveness of the training was conducted through comparative analysis of pre-test and post-test results, which aims to measure the improvement of participants' competence before and after attending the training. The results of data analysis showed a significant increase in students' mastery of concepts and technical skills, especially in the use of 3D printing technology for component manufacturing. This training is expected to be a relevant and adaptive learning model, in order to prepare SMK graduates to face the dynamics of the automotive industry which is increasingly based on technology and innovation
Downloads
References
Izhardas, J. M., & Lubis, M. S. Y. (2023). Pemanfaatan 3D Printing Untuk Pembuatan Pemegang Tools Di Workshop Go Kart. Jurnal Serina Sains, Teknik Dan Kedokteran, 1(1), 27–34. https://doi.org/10.24912/jsstk.v1i1.22748
Krisna, arie. (2020). Teknologi 3D-Printing Sudah Bisa Buat Piston Secara Instan. https://www.mobil123.com/berita/teknologi-3d-printing-sudah-bisa-buat-piston-secara-instan/60027
Kumara Sadana Putra. (2018). Pemanfaatan Teknologi 3D Printing Dalam Proses Desain Produk Gaya Hidup. SeminarNasional Sistem Informasi dan Teknologi Informasi 2018.
Lie. (2020). Seperti Apa Proyeksi 3D-printing Dalam Industri Otomotif? https://fastnlow.net/seperti-apa-proyeksi-3d-printing-dalam-industri-otomotif-simak-penjelasannya/
Maula, L. H. (2019). 3D Printing Dan Media Pembelajaran Matematika Sekolah Dasar. Jurnal Pesona Dasar, 7(2), 50–57. https://doi.org/10.24815/pear.v7i2.14758
Mujiyono, M., & Taufan, S. (2021). Pengembangan Sumber Daya Manusia di Industri Otomotif Melalui Institut Otomotif Indonesia. Jurnal Manajemen Strategi Dan Aplikasi Bisnis, 4(2), 401–408. https://doi.org/10.36407/jmsab.v4i2.396.
Prastyaningrum, Ihtiari. 2019. “Pemanfaatan Teknologi Print Tiga Dimensi Sebagai Uasaha Manufaktur Pendukung Pariwisata Lokal Daerah.” 3(1):8–11.
Ramadhan, F. E. N., & Suyanto, W. (2019). Implementasi Metode Pembelajaran Two Stay Two Stray Untuk Meningkatkan Keaktifan Dan Hasil Belajar Teknologi Dasar Otomotif Siswa Kelas X TKRB SMKN 1 Sedayu. Jurnal Pendidikan Vokasi Otomotif, 1(2), 1–14. https://doi.org/10.21831/jpvo.v1i2.24300
Ramadhan, Ali, Gunawan Syarifuddin, and Dinar Cahyaningrum. 2025. “Pemberdayaan Masyarakat Melalui Pemanfaatan 3D Printing Dalam Pembuatan Produk Di Kecamatan Cibodas.” Jurnal Pengabdian Masyarakat Multidisiplin 2(1):11.
Sonya, Ratu, Mentari Haerdy, and Fazrin Nurzannah. 2023. “Potensi Dan Kendala Penerapan Teknologi 3D Printing Dalam Penyediaan Hunian Layak Dan Terjangkau Di Indonesia.” XI(3):15–22.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2025 Jurnal Pengabdian Masyarakat Polmanbabel
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
