Analisa Kekasaran Permukaan Pada Proses Edm Sinking Menggunakan Metoda Response Surface Methodology

Authors

  • Eko Yudo
  • Zaldy Kurniawan

DOI:

https://doi.org/10.33504/manutech.v10i01.54

Keywords:

EDM sinking, surface roughness (KP), Response Surface ethodology

Abstract

The development of technology in the manufacturing sector is very fast, the market demand is diverse will the needs of products and components with complex shapes and high level of precision and hardness of material that has high strength. High degree of hardness and precision are widely used nonconventional EDM machine sinking. the electrode wear rate (LKE) and surface roughness (KP) are at least the performance of the EDM sinking machine process to be achieved. The study was conducted to determine the contribution of process parameters in order to reduce the variation of response parameters simultaneously and to determine the appropriate process parameter setting value. Parameters varied current, on time, off time and machining voltage. This research uses experimental design from Response Surface Methodology (RSM) method. And obtained the most refined Ra roughness results on Ton 100 µs, and Toff 15 µs with 10 A Ampere, and the roughest Ra roughness is obtained at Ton 300 µs, and Toff 15 µs with Ampere 20 A.

Downloads

Download data is not yet available.

References

[1] Lin, C.L., Lin, J.L. & Ko, T.C., 2002. Optimisation of the EDM Process Based on the Orthogonal Array with Fuzzy Logic and Grey Relational Analysis Method. journal of Advance Manufacturing Technology, pp.271–277.
[2] Hitachi MP30E, Machining technical Data Book, Hitachi Via Mechanics, Ltd., Kanagawa, Japan.
[3] Krar, S. F.& Check, A., 1997. Technology of Machine Tools fifth edit., Mc-Graw Hill: International Editions.
[4] Rochim, T., 2007. Klasifikasi Proses, Gaya dan Daya Pemesinan. Lab.Teknik Produksi dan Metrologi Industri ITB, Penerbit ITB, Bandung. Bandung: Institut Teknologi Bandung.
[5] Myers, RH dan DC Montgomery. 1995.
[6] Response Surface Methodology: Process and Product Optimization Using Designed Experiments. New York: John Wiley & Sons, Inc.
[7] Nuryanti dan D.J. Salimy. 2008. Metode Permukaan Respon dan Aplikasinya Pada Optimasi Eksperimen Kimia. Dalam Risalah Lokakarya Komputasi dalam Sains dan Teknologi Nuklir: 6-7 Agustus 2008 (373-391).
[8] Montgomery, DC. 2001.Design and Analysis of Experiments 5th edition. New York: John Wiley & Sons, Inc.

Downloads

Published

2019-05-17

How to Cite

Yudo, E., & Kurniawan, Z. (2019). Analisa Kekasaran Permukaan Pada Proses Edm Sinking Menggunakan Metoda Response Surface Methodology. Manutech : Jurnal Teknologi Manufaktur, 10(01), 17-23. https://doi.org/10.33504/manutech.v10i01.54

Most read articles by the same author(s)